If you own a 2020 Ford Escape or are planning to buy one, it’s essential to know what kind of oil it requires to keep it running smoothly. Oil is the lifeblood of your vehicle’s engine, and using the wrong type can cause serious damage. In this article, we’ll provide you with all the information you need to know about the 2020 Ford Escape oil type.
Why Oil Matters
First, let’s discuss why oil is so important to your vehicle’s engine. The oil lubricates the engine’s moving parts, which reduces friction and wear. It also helps to prevent corrosion and keeps the engine clean by removing dirt and debris. Additionally, oil helps to regulate engine temperature by absorbing heat and transferring it away from the engine.
Using the wrong type of oil can cause a number of problems. For example, using oil that’s too thick can reduce fuel efficiency, while using oil that’s too thin can cause excessive engine wear. It’s essential to use the oil recommended by the manufacturer to ensure optimal engine performance and longevity.
What Kind of Oil Does the 2020 Ford Escape Use?
The 2020 Ford Escape uses synthetic blend oil with a viscosity of 5W-30. This type of oil is designed to provide optimal performance in a wide range of temperatures and driving conditions. It’s important to note that the 2020 Ford Escape requires synthetic blend oil, not full synthetic oil. While full synthetic oil may offer some benefits, it’s not recommended for this vehicle.
It’s also important to use oil that meets the Ford WSS-M2C946-B1 specification. This specification ensures that the oil meets the specific requirements of the 2020 Ford Escape’s engine. Using oil that doesn’t meet this specification could cause engine damage or void your vehicle’s warranty.
How Often Should You Change Your Oil?
While the 2020 Ford Escape’s engine is designed to be durable and long-lasting, it’s still important to change the oil regularly to ensure optimal performance. The manufacturer recommends changing the oil every 7,500 miles or every 12 months, whichever comes first.
However, it’s important to note that this is a general guideline, and the frequency of oil changes may vary depending on your driving habits and conditions. For example, if you frequently drive in stop-and-go traffic or in extreme temperatures, you may need to change the oil more frequently. It’s best to consult your owner’s manual or a trusted mechanic to determine the best oil change schedule for your vehicle.
How to Check Your Oil
Checking your vehicle’s oil level is a simple process that can be done at home. Here’s how:
Step 1:
Park your vehicle on a level surface and turn off the engine.
Step 2:
Locate the oil dipstick. It’s usually labeled with an oil can icon and is located near the engine.
Step 3:
Pull the dipstick out and wipe it clean with a rag or paper towel.
Step 4:
Re-insert the dipstick all the way back into its tube.
Step 5:
Pull the dipstick out again and check the oil level. The oil should be between the two marks on the dipstick. If it’s below the lower mark, you’ll need to add more oil.
The Bottom Line
Using the correct oil is critical to the performance and longevity of your 2020 Ford Escape’s engine. Make sure to use synthetic blend oil with a viscosity of 5W-30 that meets the Ford WSS-M2C946-B1 specification. Change the oil according to the manufacturer’s guidelines, and check the oil level regularly to ensure optimal performance. By following these steps, you can help keep your 2020 Ford Escape running smoothly for years to come.
Komentar
Posting Komentar